Outdoor Lighting Technical FAQs for Project Review

SHONE uses dual waterproof construction combining structural waterproofing と full potting or silicone sealant sealing. This dual approach helps reduce water ingress risk in exposed outdoor luminaires and luminous building materials.

Relevant SHONE outdoor product families can reach IP67/IP68 waterproof protection. The products are dustproof and designed to support long-term deep-water immersion requirements according to the selected product family and project conditions.

SHONE matches sealing design and materials to waterproof requirements. Before sealing, semi-finished lamp bodies, glass or PC covers are baked at 45°C to remove moisture; adhesive sealing is then applied so that condensation does not form inside the fixture.

The thermal shock immersion test simulates demanding temperature cycling between cold water and hot water. Every product is tested to verify sealing stability.

はい. SHONE laboratory resources include UV aging test equipment and constant temperature and humidity chambers. Products undergo an extreme Double 85 テスト, running under 85°C temperature and 85% humidity for 1000 時間.

SHONE products are validated for harsh environments including strong Middle East sunlight and high-cold regions. The target is to support more than five years of outdoor use without obvious yellowing or premature aging under defined product and project conditions.

はい. Relevant outdoor product surfaces and structures are developed with UV resistance, acid resistance, alkali resistance and high-salt environment resistance considerations for long-term architectural and landscape lighting projects.

SHONE pioneered the concept of luminous building materials, where lighting becomes part of paving, wall surfaces or architectural hardscape instead of appearing as exposed fixture hardware.

SHONE luminous brick surfaces can present realistic natural stone textures, wood textures and other architectural finishes. This helps the product integrate into paving, facades and hardscape materials during daytime.

はい. Relevant luminous surfaces are designed with wear resistance, anti-slip performance and acid, alkali and salt corrosion resistance considerations for outdoor project use.

During daytime, when the light is off, the luminous surface can remain visually hidden within the architectural facade, paved ground or hardscape surface. This reduces the visual disruption often caused by exposed luminaires.

At night, the lighting surface can deliver a continuous light band with an extremely narrow dark-zone structure. This supports cleaner luminous paving, wall accents, facade outlines and public-space nightscape effects.

Material integration helps preserve the architectural concept in daylight while delivering controlled illumination at night. This is especially important for plazas, commercial landscapes, theme parks, landmarks and facade projects where fixture appearance affects design quality.

SHONE control systems support standard DMX512 そして Art-Net protocols. They can connect with mainstream lighting control equipment such as Madrix for dynamic scenes, facade lighting and cultural tourism projects.

DMX512制御可能 lighting allows project teams to manage color, brightness, scenes and synchronized effects across many fixtures. It is especially useful for facades, landmarks, plazas, bridges and theme park night-tour lighting.

SHONE validates its control system in its own EMC shielding room. The system is tested for industrial-grade anti-interference performance to support stable DMX512 signal transmission in outdoor electrical environments.

はい. SHONE control validation is designed to maintain DMX512 signal stability with no packet loss and no delay under defined project conditions. This supports 7×24 hour uninterrupted operation in complex outdoor projects.

はい. The EMC shielding validation process helps reduce signal interference risks in strong electromagnetic environments. This is important for large facade systems, infrastructure lighting, cultural tourism scenes and public-space projects.

はい. SHONE has self-developed DMX512 control and multi-sensor human-light interaction system experience. Selected project scenarios can integrate sensing, control logic and dynamic lighting effects.

はい. SHONE can coordinate protocol, signal control drawings and control logic with the client’s lighting designer, system integrator or project engineering team during qualified project communication.

SHONEがサポートします MOQなし for project sample validation. Overseas contractors, designers, brands and distributors can start with single-unit samples before wider project procurement.

はい. SHONE supports single-unit sample shipment for project verification, including structure review, lighting effect review, installation fit and waterproof reliability communication before batch production.

For regular bulk orders, SHONE uses T/T 30/70 as the standard payment structure. This means 30% deposit in advance and 70% balance before shipment.

SHONE mainly works with EXW, meaning ex-works factory delivery. This provides a clear and transparent trade-term basis for overseas B2B procurement communication.

Standard products rely on automated production line support and are strictly controlled within 25 working days according to confirmed order and production conditions.

Deep custom projects, such as customized housing or stone-texture patterns, usually follow a 35-40 working day full-process path. This includes 7-10 working days fast sampling そして 25-working-day mass production サンプル確認後.

Clear drawings, application conditions, product family direction, target surface finish, 制御方法, quantity expectation and target market requirements help SHONE evaluate feasibility and control the custom delivery path.

SHONE works not only as a lighting product manufacturer, but also as a project support partner. The team can support project deepening communication, product matching, lighting effect planning and technical coordination for outdoor architectural lighting projects.

When clients provide architectural elevation drawings or floor plans, SHONE can support night-scene renderings, illuminance simulation, accurate IES photometric files, CAD installation node drawings and electrical signal control drawings during qualified project communication.

Public download is limited to the 製品カタログ after submitting the catalog inquiry form. IESファイル, DIALux simulation support, CAD drawings and electrical signal control drawings are provided during qualified project communication as project-stage technical support materials.

SHONE provides a 3-year warranty for all standard product lines. Warranty handling should be reviewed according to product type, application conditions and project communication records.

はい. For complex smart interactive systems, SHONE can provide English installation videos and technical installation guidance to support overseas project teams.

はい. SHONE can provide remote programming and commissioning support for selected intelligent control or interactive lighting systems, helping project teams coordinate scene logic and system behavior.

If necessary, SHONE can arrange technical personnel for on-site project guidance. Travel costs are borne by the client, and the arrangement should be confirmed based on project scope, location and service requirements.

LED舗装灯 are suitable for plazas, commercial hardscape, public routes and luminous paving scenes where ground integration, load-bearing safety and visual guidance matter.

LED wall tiles are suitable for outdoor wall panels, feature walls, luminous facades and architectural surfaces where daytime material integration and nighttime illumination both matter.

LED linear lights are suitable for building outlines, bridge edges, curtain walls and dynamic facade lines. Their impact resistance should be reviewed separately from ground-use products because they are not designed as rolling-load materials.

Wall washer lights are suitable for vertical surface washing, texture grazing and facade brightness distribution where the goal is to illuminate walls, columns or architectural planes.

LED floodlights are suitable for long-distance projection, landmark accents, large outdoor areas and building elevations that need broader beam coverage.

Commercial solar paver lights are suitable for outdoor areas where cable routing is limited and ground-integrated luminous guidance is required. Heavy-duty solar paver configurations can be evaluated for vehicle rolling requirements.